TPO Flooring - Coin
- State-of-the-art technology advanced TPO (thermoplastic polyolefin) flooring membrane
- Versatile enough to meet almost any interior or exterior application requiring resistance to weather, chemicals and traffic.
- Black nickel plate design
- Stocked in 102" wide roll and sold per linear foot (102" x 12")
**GENERAL USAGE FOR SPRINTER VANS** (For sizing scroll down to select the correct sizing needed then add to cart)
144" - 12 feet of flooring
170" - 15 feet of flooring
170"ext - 16 feet of flooring
What's So Amazing?
Dicor TPO is highly chemical resistant to gasoline, diesel fuel, antifreeze, battery acid, engine oil, transmission fluid, brake fluid, cleansers and many other common chemicals.
It meets all safety regulation criteria for Federal Motor Vehicle Safety Standard (FMVSS) #302 Certification. Unlike competitive vinyl (PVC) membrane products, the TPO will not emit toxic fumes when burnt.
Dicor TPO has excellent weathering characteristics, durability and mechanical performance with inherent UV stability and skid resistance. This makes it a tremendous high traffic and extreme exposure membrane.
It does not emit any notable odor commonly experienced with competitive rubber-based membranes.
TPO flooring incorporates a spun poyester (fleece) backing, which is mechanically attached during the extrusion manufacturing process. This backing enables TPO flooring to be easily bonded to a variety of porous wood surfaces. Alpha Systems 3080 TPO Flooring Adhesive is recommended for bonding TPO flooring.
Alpha Systems 3080 TPO Flooring Adhesive may be applied with brush, roller or trowel. Surface should be free of dirt, oil, or other contaminants. Apply a coat of adhesive to one surface (16-20 mils thick). Mate the two surfaces as soon as possible (approx. open time 5-10 minutes. Use a 70 lb. linoleum roller (or equivalent) to apply pressure so that adhesive can properly penetrate into the fleece.
IMMEDIATELY following the adhesive application and rolling process mechanically fasten the perimeter of the TPO flooring.
|Property||Attained value||Test method|
|Melt flow rate (230C – 2.16kg)||1.5 – 3.0 g/10 min.||ASTM D1238|
|Specific gravity||0.93||ASTM D792|
|Tensile strength (2”/min)||1933 psi (14 MPa)||ASTM D638|
|Flexural modulus||17,600 psi (121 MPa)||ASTM D790|
|Elongation at break (2”/min)||586%||ASTM D638|
|Notched izod impact||No break||ASTM D256|
|Gardner impact (-30C)||240 lbs.||ASTM D5420|
|Low temperature flexibility||No cracking||ESB-M5G52A|
|Hardness||98 shore A||ASTM D2240|
|Coefficient of linear thermal expansion||2.8x10-5 in/in/ºF||ASTM D696|
|% CLTE movement @ 110ºF temp change*||0.31% (31/100’s of 1%)||Calculated|
*Represents a temperature change of 70ºF to 180ºF or 70ºF to -40ºF
|Surface Texture||Diamond plate||Levant texture|
NOTE: The Coefficient of Friction was performed in accordance with ASTM D1894-01 procedures. Specimens were tested against 1/8” thick Neoprene block with Durometer Hardness 70 Shore A (replicates common tennis shoe). The 422-CR were tested in 3 conditions: dry, wet and salt water and wet and fresh water.
DICOR TPO FLAMMABILITY
Dicor TPO meets all safety regulation criteria for Federal Motor Vehicle Safety Standards (FMVSS) #302 Certification.
Roll Size: 102"
Application: Dicor floor adhesive
Patterns: Nickel Plate
Color: Standard: Black. Other colors are available through special order.