07+ Sprinter Van Panel Bed, 144" WB, 36" H

Item Number: 61999-58-01

Regular price $2,859.99 Special Price

Many hours of research and development were invested in perfecting this panel bed kit for 2007+ Mercedes Sprinter vans!
Precisely engineered for the perfect fit, these panel bed kits are the ultimate sleeping/storage solution for Sprinter vans.

Features:
> Pre-drilled mounting brackets
> Light weight aluminum frames
> Mini-texture black powder coated frames
> Graphite tweed wrapped plywood panel covers
> Spring-loaded locking pins to keep panels safely in place
> Rubber friction trim on mounting tracks keeps noise under control

Benefits:
> Easy to install, no van body modifications needed*
> Full sized adult sleeping accomodations* without sacrificing storage capacity
> Easily stacked or removed for maximum storage space when bed is not being used
> Use as a storage deck to double your effective storage space

Configurations:
> 144"WB - 64.750" Wall Mounted Rail Set (2pc), (2) - 24" Bed Panels, (1) - 16.375" Bed Panel. Standard bed length is 64.375"
>> Choosing optional extended rear panel will make the overall bed length 70.125"
>>>You can also swap out the standard 24" front panel for an extended front panel for a total length (with both extended panels) is 75.875"
> 170"WB - 51.075" & 54.875" Wall Mounted Rail Sets (4pc, total length 105.95"), (3) - 24" Bed Panels. Standard bed length is 72"
>> Choosing optional extended rear panel will make the overall bed length 77.75", Add an extra 24" Bed Panel for a total bed length of 101.75"
> 170"WB Ext - 66.75" & 54.875" Wall Mount Rail Sets (4pc, tota length 121.625"), (3) - 24" Bed Panels. Standard bed length is 72"
>> Choosing optional extended rear panel will make the overall bed length 77.75", Add an extra 24" Bed Panel for a total bed length of 101.75"
>>>Leave the rear panel as a standard and you can add up to (2) - 24" Bed Panels for a total bed length of 120"

There are two different mounting heights possible depending on customer preference. Measured from the floor up, the options are 36" and 45". The shorter 36" mounting height allows for increased headroom while sitting on the bed surface especially if a full sized mattress is being used or there are wall cabinets intalled in the bed area. The higher 45" mounting height allows enough room for most bicycles, small quads and other toys/gear to be stowed underneath the bed but still has enough room up on the bed to sleep comfortably or store other items. Bed panels are not interchangeable between the 2 mounting height options.

These panel beds are configurable to your own needs and preferences. Depending on the van model and overall track length, you can add panels for a larger sleeping/storage surface and/or swap out the rear panel for an extended version which takes advantage of extra space around the rear door frame area. Standard bed panels are 24" long. Rear bed panels are available in an extended version which adds nearly 6" of extra bed length at the center without sacrificing additional wall space.

Note: Although these beds can be installed directly to the van body with sheet metal screws, the thin sheet metal of the van body doesn't do a great job of holding those screws with a heavy load on them. It's possible for the screw holes to fail. Rivet nuts are the next best way to install the wall rails but they require a special tool to install and allow a stronger mounting solution to the thin body panel material. For optimum load carrying capabilities and safety, we recommend the installation of steel flat bar material which is welded to the van body at the proper height. You can purchase the panel bed mounting reinforcement kit here. (coming soon)

My Cart

You have items in your cart.
Cart Subtotal:
  • {property.name}: {property.value}
- +